RCI-69 Base


		Chat
	Orders with radio work are delayed 3 - 10 days

10 Meter Base Radio

Click image for larger view

RCI-69 Base
AM/FM/SSB/CW
...Discontinued...

RT1 Mosfets for a full 100W output
CW, FM, AM, USB, LSB Mode
Built-in 5 Digit Frequency Readout
Large Frequency Selector Knob
Variable Dimmer Control
Improved Receiver Design
2 Color Xmit/Rcv Indicator
Advanced Noise Filter Circuit Switch
Automatic Noise Limiter Switch
Large Illuminated SWR Meter
Large Illuminated S/RF Meter
RF Gain/SWR/Cal Switch
Separate SWR Cal Control
Separate Adjustable Volume/Squelch Control
RF Gain Control
2 Stage Clarifier Control
Mic Gain Control
Dynamic Mike Included
End of Transmission Signal Tone (Roger Beep)
Echo Tone and time controls
Adjustable Talk Back Control
Front Panel Headphone Jack
External Speaker Jack
Variable RF Power Output Control
2 Year Factory Warranty
Radio Weight -- 21 pounds
Shipping weight and size (double boxed and oversized)
- 30 pounds.
- Inner Box with Foam inserts
- inner box wrapped in layers of bubble wrap (2" thick)
  placed inside a larger Outer Box. (25 x 25 x 20), this
  provides for shock protection that foam inserts alone do not have.
Ships FedEx Ground with $500 insurance and Signature required.

The item most overlooked when ordering a custom radio is the microphone. Your new radio will NOT sound great with a stock mic on it even if you have it tuned. If your CB is more than a tool for work, you NEED to upgrade your microphone.
My personal favorites are the Astatic 636L and RD104E.

Ranger radios sometimes have a small scratch or ding that the factory covers with black touch up. We cannot effect this and do not guarantee your radio to be cosmetically perfect. Bells CB will make no marks or scratches on your radio ourselves. Ranger might though and I cannot control it.

We ask that if you may need Warranty service on this radio to please send directly to Ranger. You can find all the information you need Here<---

Comply with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Further information can be found at the FCC website http://fcc.gov or the ARRL website http://arrl.org.

Transmitting using this radio requires an Amateur Radio License. Licensing information can be obtained by visiting www.fcc.gov or http://arrl.org. In Canada, visit http://strategis.ic.gc.ca or http://www.rac.ca

SOLD
OUT

....Base Station 10 Meter radio....

  *** This Item has been Discontinued
         by the manufacturer and remains
         here for reference and support
         information only. ***

$549^.50

Optional Accessories

Tune-up and frequency conversion. (Some radios have internal factory options for expanded frequency coverage / more channels)AM: 2~20w , Peak AM: 100w , PEP SSB:10~60w

$59

Perform Receiver improvement mods.
(These mods replace key RX parts for better sensitivity and selectivity)

$26

Turner RK-56 Noise Canceling microphone.
(wired for this radio with a 4 pin plug)

$55

Astatic 636L Noise Canceling microphone.
(wired for this radio with a 4 pin plug)

$29

Astatic RD104-E Amplified microphone.
(wired for this radio with a 4 pin plug and a battery installed)

$46

Install a Record/Playback Module 120 seconds
(wired inside the radio with two pushbuttons in the back to record 120 seconds and to play it back)

$77

Install a Noise toy
(wired inside the radio with a switch or pushbutton in the back to trigger any 30 second sound byte you want)

$65

Install a Noise toy as a background theme music
(wired inside the radio with a switch to play any background
music at very low volume so you can talk over it.)

$65

Install brighter LED lighting Triple LED's behind each of the 2 meters. I like white the best and it's the only color I guarantee you will see bright and nice.

$36

Add a Small External Speaker
(plugs into back of the radio for improved sound)

$12

Add a Large External Speaker
(plugs into back of the radio for improved sound)

$25

CB Microphone Wiring (Galaxy)

		TECH INFO
	TECH SERVICES